2016 Manitex Liftking RTH 5.23 Base

Information

2016 Manitex Liftking RTH 5.23

Magni Telehandlers is an Italian manufacturer of telescopic handlers. Magni is located in Castelfranco Emilia, Modena.

Photos

Highlights

  • Muncy, Pennsylvania
  • 2016
  • Manitex Liftking
  • RTH 5.23 Base
  • Hydrostatic
  • Diesel direct injection turbocharged
  • Available
  • Max. 2.508 mm (98.7 in) (on wheels)
  • Max. height (boom retracted and lowered): 3.056 mm (120.3 in) (on wheels)

Specifications

  • 2016
  • Manitex Liftking
  • RTH 5.23
  • Base
  • General
  • Mercedes OM 924 LA Euro 4 Interim
  • 115 KW at 2.200 rpm
  • Max. 610 Nm at 1.200-1.600 rpm
  • Variable displacement pump(max 5.2cuin/r) el.controlled Variable displacement motor (max 7.1 cu in)
  • 4 in line
  • Diesel direct injection turbocharged
  • Water – intercooler
  • Max. length (boom retracted and lowered): 7.366 mm (290 in) (at vertical point of forks foothold)
  • Max. 2.508 mm (98.7 in) (on wheels)
  • Max. height (boom retracted and lowered): 3.056 mm (120.3 in) (on wheels)
  • 3.300 mm (129.9 in)
  • 335 mm (13.2 in)
  • 22,63 m (74.2 ft)
  • 17.500 kg (38,581 lbs)
  • Rear axle unladen (boom retracted and lowered): 8.250 kg (18,188 lbs)
  • 200 l (52.8 gal)
  • 16 l (4.2 gal)
  • (liquid) 20 l (5.3 gal)
  • 88 Kn (8,973 kg)
  • Max. operating system pressure: 350 bar (5,076 psi)
  • Bosch Rexroth – Variable displacement max 58,5 cc/r (max 3.6cu in/r)
  • Flow rate 130 l/min ( 34.3 gal/min)
  • Hydrostatic
  • 500 bar (7,252 psi)
  • 2 speeds (4,06-1,43) forward-reverse
  • 40 km/h (24.8 mph)
  • (End of forks) 7,00 m (23 ft)
  • 18 x 22,5
  • 18 x 22,5
  • Hydraulically activated, oil-immersed multi-disc type on each axle
  • Hydraulic with negative action