2016 Manitex Liftking HTH 30.12 Base

Information

2016 Manitex Liftking HTH 30.12

Magni Telehandlers is an Italian manufacturer of telescopic handlers. Magni is located in Castelfranco Emilia, Modena.

Photos

Highlights

  • Muncy, Pennsylvania
  • 2016
  • Manitex Liftking
  • HTH 30.12 Base
  • Rexroth hydrostatics
  • Available

Specifications

  • 2016
  • Manitex Liftking
  • HTH 30.12
  • Base
  • General
  • Mercedes OM 926 LA Euro 4 Interim
  • Power 240 KW (Power 320 HP)
  • Max. 1.300 Nm at 1.200 rpm (959 ft lbs at 1.200 rpm)
  • 6 cylinders / 7.200 cm3 (439.4 in3)
  • Liquid cooling system
  • 11,72 m (38.45 ft)
  • 40.800 kg (89,948 lbs)
  • Rear axle unladen (boom retracted and lowered): 23.200 kg (51,147 lbs)
  • 300 l (79.3 gal)
  • 28 l (7.4 gal)
  • (liquid) 25 l (6.6 gal)
  • 365 kN (37,220 kg)
  • Load sensing piston pump 95 cc 220 l/min (5.8 cu in 58.1 gal/min)
  • 300 l (79.3 gal)
  • Rexroth hydrostatics
  • Variable displacement hydrostatic pump 175 cc w (10.7 cu in) with electronic control
  • 3 speeds forward / reverse
  • 25 km/h (15.5 mph)
  • (End of forks) 7.991 mm (314.6 in)
  • 29,5 - R25
  • 29,5 - R25
  • Hydraulic servo-assisted multidisc brake in oil bath on both axles, with double circuit
  • Negative parking brake