2025 Generac Mobile Stationary Generators SD200
- Year 2025
- Make Generac Mobile
- Model Stationary Generators
2025 Generac Mobile Stationary Generators SD200
2025 Generac Mobile Stationary Generators SD200
Every area of the country comes with different outage-related challenges and our proven gensets can meet all of them. What's more, if you are in an area where noise can be an issue, we provide sound attenuated enclosures, so you can be a good neighbor.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
Engine
Engine Manufacturer
Iveco/FPT
Emissions
EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
Cylinder Liners
6
Engine Type
In-line | Direct Injection
Displacement
8.7 in3 (530.91 L)
Bore
117 in (4.61 mm)
Stroke
135 in (5.31 mm)
Compression Ratio
16.5:1
Intake Design
Air Method: Turbocharged/Aftercooled
Governor
Electronic Isochronous
Cooling
Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension | 50/50 Ethylene Glycol Antifreeze | 120 VAC Coolant Heater
Engine Power
Horsepower at Rated kW: 320 hp | Three-Phase 120/208 VAC @0.8p: 200 kW / 833 Amps | Three-Phase 120/208 VAC @0.8pf: 200 kW / 694 Amps | Three-Phase 120/240 VAC @0.8pf: 200 kW / 601 Amps | Three-Phase 277/480 VAC @0.8pf: 200 kW / 301 Amps | Three-Phase 346/600 VAC @0.8pf: 200 kW / 241 Amps
Rated Engine Speed
1,800 RPM
Fuel System
Fuel Type
Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
Fuel System
Filtering (Microns): 5 | Fuel Lockoff Solenoid | Primary Fuel Filter
Fuel Injection
Type: Common Rail
Fuel Usage, 100% Load
25%: 4.4 gph (16.7 Lph) | 50%: 8.3 gph (31.4 Lph) | 75%: 11.9 gph (45 Lph) | 100%: 14.8 gph (56 Lph)
Battery
Battery
Size: See Battery Index 0161970SBY | Voltage: (2) -12 VDC
Battery Charger Input
Alternator: Standard
Electric
Electrical
System Voltage: 24 VDC | Ground :Polarity Negative
Alternator
Standard Model: Generac 520 mm | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet Excitation | Bearings: Single Sealed Cartridge | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Material | Vented Rotor | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Permanent Magnet Excitation | Sealed Bearings | Automated Manufacturing (Winding, Insertion, Lacing, Varnishing) | Rotor Dynamically Spin Balanced | Amortisseur Winding | Full Load Capacity Alternator | Protective Thermal Switch
Operational
Operating Conditions
Frequency Regulation (Steady State): ±0.25% | Heat Rejection to Coolant: 545,646 BTU/hr
Operating Speed
Fan: 2,538 RPM | Piston: 1,593 ft/min
Operating Temperature, Maximum
Maximum Operating Ambient Temperature: 120 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output Post Silencer): 920 °F (493 °C)
Hydraulics
Pump Type
Oil: Gear | Water: Pre-Lubed, Self Sealing | Fuel Inject: Make Electronic | Fuel: Engine Driven Gear
Oil Filter
Type: Full-Flow
Hydraulic Flow
Total Fuel Pump Flow (Combustion + Return): 26 gph (98 Lph) | Coolant Flow: 63.3 gpm (240.0 Lpm)
Airflow
Inlet Air: 8,872 cfm (251 m3/hr) | Flow at Rated Power: 595 cfm (16.8 m3/min) | Exhaust Flow (Rated Output): 1,345 cfm (38.1 m3/min)
Maximum Pressure
Maximum Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 265 psi | Maximum Allowable Backpressure (Post Silencer): 1.5 inHg (5.1 kPa)
Dimensions
Dimensions
Fan Diameter: 762 mm (30 in) | Fuel Pump Lift: 3 ft (1 m)
Capacities
Oil capacity
Crankcase Oil Capacity: 28.0 L (29.6 qts)
Cooling System
Coolant Capacity: 12.7 gal (49.2 L)
Features
Features
Cylinder Head: 4–Valve | Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Factory Filled Oil | Radiator Duct Adapter (Open Set Only) | Critical Silencer (Enclosed Only | Battery Charging Alternator | Battery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Only)
Construction Material
Piston Type: Aluminum | Crankshaft Type: Dropped Forged Steel | Stainless Steel Flexible Exhaust Connection
Warranty
Warranty
2 Year Extended Limited Warranty (Standby Rated Units) | 1 Year Extended Limited Warranty (Prime Rated Units)