2025 Generac Mobile Stationary Generators SD060

Information

2025 Generac Mobile Stationary Generators SD060

Small businesses need backup power as much as big businesses. You have equipment and inventory that needs to be safe-guarded, not to mention customer data that needs protection whether you sell online or not. Go to the proven resource--Generac.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Muncy, Pennsylvania
  • 2025
  • Generac Mobile
  • Stationary Generators SD060
  • Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
  • Available

Specifications

  • 2025
  • Generac Mobile
  • Stationary Generators
  • SD060
  • General
  • Iveco/FPT
  • EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • 4
  • In-Line
  • 274.6 in3 (4.5 L)
  • 4.1 in (105 mm)
  • 5.2 in (132 mm)
  • 17.5:1
  • Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension
  • Horsepower at Rated kW: 93 hp | Single-Phase 120/240 VAC @1.0pf: 60 kW / 250 Amps | Three-Phase 120/208 VAC @0.8pf: 60 kW / 208 Amps | Three-Phase 120/240 VAC @0.8pf: 60 kW / 180 Amps | Three-Phase 277/480 VAC @0.8pf. 60 kW / 90 Amps | Three-Phase 346/600 VAC @0.8pf: 60 kW / 72 Amps
  • Intake Method: Turbocharged
  • Electronic Isochronous
  • Fuel Lockoff Solenoid | Primary Fuel Filter
  • Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
  • Mechanical
  • Diesel 25%: 1.9 gph (7.2 Lph) | Diesel 50%: 3.0 gph (11.4 Lph) | Diesel 75%. 4.1 gph (15.5 Lph) | Diesel 100%: 5.2 gph (19.7 Lph)
  • Size: See Battery Index 0161970SBY | Voltage: 12 VDC
  • Standard
  • System Voltage: 12 VDC | Ground Polarity: Negative (-)
  • Standard Model: K0060124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Brushless | Bearings: One, Pre-Lubed and Sealed | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Brushless Excitation | Sealed Bearing | Rotor Dynamically Spin Balanced | Amortisseur Winding | Full Load Capacity Alternator | Protective Thermal Switch
  • Frequency Regulation (Steady State). ±0.25%
  • Fan: 2,538 RPM | Rated Engine: 1,800 RPM | Piston: 1,559 ft/min (475 m/min)
  • Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output): 800 °F (426 °C)
  • Oil: Gear | Water: Belt Driven Centrifugal | Fuel: Engine Driven Gear
  • Type: Full-Flow Cartridge
  • Total Fuel Pump Flow (Combustion + Return): 13.6 gph (51.5 Lph) | Coolant Flow: 32.7 gpm (123.8 Lpm) | Exhaust Flow (Rated Output): 714 cfm (20.2 m3/min)
  • Inlet Air: 6,360 cfm (180 m3/min) | Flow at Rated Power: 306 cfm (8.7 m3/min)
  • Maximum Additional Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 154 psi (1,062 kPa) | Maximum Allowable Backpressure (Post Silencer): 1.5 inHg (5.1 kPa)
  • Fan Diameter: 26 in (660 mm) | Fuel Supply Line: 0.5 in (12.7 mm) NPT | Fuel Return Line: 0.5 in (12.7 mm) NPT | Fuel Pump Lift: 3 ft (1 m)
  • Engine: 14.4 qt (13.6 L)
  • Coolant Capacity: 4.5 gal (17.4 L)
  • Cylinder Head Type: 2-Valve | Fan Type: Pusher | Engine Block Heater | Oil Drain Extension | Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Battery Charging Alternator | Battery Cables | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing
  • Piston Type: Aluminum | Crankshaft Type: Forged Steel | Stainless Steel Flexible Exhaust Connection
  • 2 Year Limited Warranty (Standby Rated Units) | 1 Year Limited Warranty (Prime Rated Units)