2020 Furukawa Rock Drill Rock Drill HCR1450-ED

Information

2020 Furukawa Rock Drill Rock Drill HCR1450-ED

The HCR1450-EDII with extendable boom incorporates a self-adjusting drill system that ensures high productivity no matter what the drilling situation.

Low-emission Tier IV engines offer low fuel consumption and meets US exhaust emissions regulations.

The Furukawa HD828S drifter combines powerful penetration with agility and easy operation. Equipped with features that maximize efficiency, the HD828S drifter sets the standard in high-performance drilling.

Features may include:

  • Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever.
  • HCR1450-EDII features 12' rods with extendable boom for increased drill pattern.
  • Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear – ensures strength and durability.
  • High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
  • Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions.

Photos

Highlights

  • Muncy, Pennsylvania
  • 2020
  • Furukawa Rock Drill
  • Rock Drill HCR1450-ED
  • QSB6.7
  • Available

Specifications

  • 2020
  • Furukawa Rock Drill
  • Rock Drill
  • HCR1450-ED
  • General
  • QSB6.7
  • Cummins
  • 260 hp (194 kw)
  • 2,500 rpm (2,500 min-1)
  • Tier4 Final, Stage IV | Turbo Charged Diesel Engine
  • Water-cooled
  • Drive: Hydraulic Motor with Reduction Gear
  • Direct
  • 12V; 108Ah/5Hr
  • Voltage: DC24V
  • Maximum Grade of Hill Climb: 57.7% (30°) | Maximum Altitude: Max. 8,202 ft (Max. 2,500 m)
  • Travel: 0-2.3 mph (0-3.7 km/h) | Number of Blows: 2,500~3,000 bpm (2,500~3,000 min-1) | Number of Revolutions: 0-190 rpm (0-190 min-1)
  • 5° – 113° F (-15° – +45° C)
  • Variable Displacement: Axial Piston Pump X2 | Fixed Displacement: Gear Pump X3
  • Ground Contact Pressure: 12.8 psi (87.9 kPa) | Compressor Discharge Pressure: 149 psi (1.03 MPa)
  • Compressor Discharge: 353 CFM (10.0 m3/min) | Dust Collector: 1,413 CFM (40 m3/min)
  • Bit Diameter: 3" - 5" (76 - 127 mm)
  • 3'10" (1,158 mm) | Guide Shell: 28'6" (8,700 mm)
  • 1'4" (387.4 mm)
  • 1'1" (327.5 mm)
  • Boom Slide: 2'11" (900 mm) | Feed: 15'1" (4,595 mm) | Guide Slide: 4'11" (1,500 mm) | Rod T38 - T45: 12' (3,660 mm) | Rod: 12' (3,660 mm) | First Rod Length Maximum: 14' (4,265 mm)
  • Oscillating Angle: +-8.5 deg
  • Boom Lifting Angle Up/Down: 41°/20° | Guide Tilt: 170°
  • Boom Swing: 32° | Guide Swing: 25°
  • Boom Swing: 5° | Guide Swing: 90°
  • 112 gal (425 L)
  • 57 gal (215 L)
  • DEF: 5 gal (19 L)
  • Boom Type: Extension Boom | Compressor Type: Screw 1-Stage | Dust Removal System: Automatic Pulse Air Jet | Dust Removal Suction Cap: Slide Type | Number of Rods: 7 | Bit Profile: Button, Cross and Spike | Rod Size: 45R, 51R
  • Drifter Mass: 597 Ibs. (271 kg)
  • with Fuel/Oil: 36,288 lbs. (16,460 kg) | Drifter: 533 lbs. (242 kg.)
  • Drifter: HD828S | Boom: JE326-134 | Guide Shell: GH832-33 | Compressor: AIR MAN, PDS265-S37F | Dust Collector: A885-44
  • Guide Shell: Hydraulic Motor Drive
  • Dust Collector ,Number of Elements: 6