2020 Furukawa Rock Drill Rock Drill HCR1450-ED
- Year 2020
- Make Furukawa Rock Drill
- Model Rock Drill
- Engine QSB6.7
2020 Furukawa Rock Drill Rock Drill HCR1450-ED
2020 Furukawa Rock Drill Rock Drill HCR1450-ED
The HCR1450-EDII with extendable boom incorporates a self-adjusting drill system that ensures high productivity no matter what the drilling situation.Low-emission Tier IV engines offer low fuel consumption and meets US exhaust emissions regulations.
The Furukawa HD828S drifter combines powerful penetration with agility and easy operation. Equipped with features that maximize efficiency, the HD828S drifter sets the standard in high-performance drilling.
Features may include:
- Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever.
- HCR1450-EDII features 12' rods with extendable boom for increased drill pattern.
- Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear – ensures strength and durability.
- High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
- Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions.
Engine
Engine
QSB6.7
Engine Manufacturer
Cummins
Engine Power
260 hp (194 kw)
Rated Engine Speed
2,500 rpm (2,500 min-1)
Engine Type
Tier4 Final, Stage IV | Turbo Charged Diesel Engine
Cooling System
Water-cooled
Motor
Motor Type
Drive: Hydraulic Motor with Reduction Gear
Fuel System
Fuel Injection
Direct
Battery
Battery
12V; 108Ah/5Hr
Electric
Electrical
Voltage: DC24V
Operational
Operating Conditions
Maximum Grade of Hill Climb: 57.7% (30°) | Maximum Altitude: Max. 8,202 ft (Max. 2,500 m)
Operating Speed
Travel: 0-2.3 mph (0-3.7 km/h) | Number of Blows: 2,500~3,000 bpm (2,500~3,000 min-1) | Number of Revolutions: 0-190 rpm (0-190 min-1)
Operating Temperature, Maximum
5° – 113° F (-15° – +45° C)
Hydraulics
Pump Type
Variable Displacement: Axial Piston Pump X2 | Fixed Displacement: Gear Pump X3
Maximum Pressure
Ground Contact Pressure: 12.8 psi (87.9 kPa) | Compressor Discharge Pressure: 149 psi (1.03 MPa)
Airflow
Compressor Discharge: 353 CFM (10.0 m3/min) | Dust Collector: 1,413 CFM (40 m3/min)
Dimensions
Dimensions
Bit Diameter: 3" - 5" (76 - 127 mm)
Overall Length
3'10" (1,158 mm) | Guide Shell: 28'6" (8,700 mm)
Overall Width
1'4" (387.4 mm)
Overall Height
1'1" (327.5 mm)
Length
Boom Slide: 2'11" (900 mm) | Feed: 15'1" (4,595 mm) | Guide Slide: 4'11" (1,500 mm) | Rod T38 - T45: 12' (3,660 mm) | Rod: 12' (3,660 mm) | First Rod Length Maximum: 14' (4,265 mm)
Angle Positions, Forward
Oscillating Angle: +-8.5 deg
Lift Mechanism
Boom Lifting Angle Up/Down: 41°/20° | Guide Tilt: 170°
Lean Angle, Right (deg.)
Boom Swing: 32° | Guide Swing: 25°
Lean Angle, Left (deg.)
Boom Swing: 5° | Guide Swing: 90°
Capacities
Fuel Capacity
112 gal (425 L)
Hydraulic Capacity
57 gal (215 L)
Tank Type
DEF: 5 gal (19 L)
Features
Maximum Traction Force: 22,144 lb-force (98.5 kN) | Guide Shell Maximum Pulling Force: 7,644 lb-force (34 kN)
Weights
Weight
Drifter Mass: 597 Ibs. (271 kg)
Weight, In Running Order
with Fuel/Oil: 36,288 lbs. (16,460 kg) | Drifter: 533 lbs. (242 kg.)
Features
Features
Boom Type: Extension Boom | Compressor Type: Screw 1-Stage | Dust Removal System: Automatic Pulse Air Jet | Dust Removal Suction Cap: Slide Type | Number of Rods: 7 | Bit Profile: Button, Cross and Spike | Rod Size: 45R, 51R
Model Id
Drifter: HD828S | Boom: JE326-134 | Guide Shell: GH832-33 | Compressor: AIR MAN, PDS265-S37F | Dust Collector: A885-44
Feed System
Guide Shell: Hydraulic Motor Drive
Air Filter
Dust Collector ,Number of Elements: 6