2020 Furukawa Rock Drill Rock Drill HCR1100-ER

Information

2020 Furukawa Rock Drill Rock Drill HCR1100-ER

The HCR1100-ER drill incorporates innovative features for higher output and is capable of drilling at larger diameters.

Utilizing a Cummins® Tier-IV EPA compliant engine, the HCR1100-ER combines higher performance with fuel efficiency.

The Furukawa HD822 drifter (patent applied for) is designed to minimize drill noise and vibration, while increasing performance. With 26.7% more impact and 13% more airflow than its predecessor, this drill has the ability to perform in harder rock at a larger diameter.

Features may include:

  • The improved electro-hydraulics allow easier operation
  • With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation
  • The monitoring system incorporates gauges next to the drilling station, allowing the operator a quick visual of engine temperature, hydraulic oil temperature and fluid levels
  • Automatic rod changer to eliminate the need for operators to manually install drill steel, resulting in increased production and enhanced operator safety.
  • Upgraded compressor increases free air delivery by nearly 28% to accommodate larger diameter drilling
  • Winch-ready frame adds application versatility

Photos

Highlights

  • Muncy, Pennsylvania
  • 2020
  • Furukawa Rock Drill
  • Rock Drill HCR1100-ER
  • QSB6.7
  • Diesel Engine
  • Available

Specifications

  • 2020
  • Furukawa Rock Drill
  • Rock Drill
  • HCR1100-ER
  • General
  • QSB6.7
  • Cummins®
  • 6-Cylinder
  • Rated: 226 HP (168 Kw)
  • Rated: 2,200 rpm (2,200 min-1)
  • Water Cooled
  • Tier-IV Final
  • Drive: Hydraulic Motor with Reduction Gear
  • Diesel Engine
  • 12 Volt; 108Ah/5Hr
  • DC 24V
  • Maximum Grade of Hill Climb: 57.7% (30°) | Drifter: 29.5 HP (22 kw)
  • Travel: 0 to 2 mph (0 to 3.2 km/h) | Number of Blows - Drifter: 2,700 to 3,300 bpm | Number of Revolutions - Drifter: 190 rpm
  • 5° to 113° F (-15° to +45° C)
  • Variable Displacement: Axial Piston Pump X2 | Fixed Displacement: Gear Pump X3
  • Compressor Discharge: 275 cfm (7.8 m3/min) | Dust Collector: 918 cfm (26 m3/min)
  • Ground Contact Pressure *3: 11.2 psi (77.3 kPa) | Compressor Discharge Pressure: 149 psi (1.03 Mpa)
  • Bit Diameter: 2.5" to 4" (64 mm to 102 mm)
  • Drifter: 44.5" (1,130 mm) | Guide Shell: 26' 0" (7,925 mm)
  • Drifter: 14.7"(373 mm)
  • Overall: 12.9" (328 mm)
  • Boom Slide: 3' 11" (1,200 mm) | Guide Shell Feed: 15' 8" (4,781 mm) | Guide Slide: 3' 11" (1,200 mm) | Rod Length T38 - T45: 10' (3.05mm) / 12' (3.66mm) | Rod: 10' or 12' (3,050 or 3,660 mm) | First Rod Length Maximum: 13' (4,000 mm)
  • 23" (585 mm)
  • Oscillating Angle: ±7.6°
  • Boom Lifting Angle - Up/Down: 45°/15° | Guide Tilt Angle: 180°
  • Boom Swing: 30° | Guide Swin: 30°
  • Boom Swing: 30° | Guide Swing: 90°
  • 84 US Gal (320 L)
  • Tank: 45 US Gal (170 L)
  • DEF *4: 5 US Gal (19L)
  • Boom Type: Extension Boom | Compressor Type: Screw 1-Stage | Dust Collector Elements Qty.: 5 | Dust Removal System: Automatic Pulse Air Jet | Dust Collector Suction Cap: Slide Type | Rod Changer - Number of Rods: 5 | Rod Size: T38 T45
  • With Fuel/Oil: 27,500 lbs. (12,460 kg.) | Drifter: 533 lbs. (242 kg.)
  • Drifter: HD 822 | Boom: JE326 | Guide Shell: GH831 | Compressor: AIRMAN PDS265-S37C | Dust Collector: A844
  • Guide Shell: Motor Chain