2020 Furukawa Rock Drill Rock Drill HCR1100-ER
- Year 2020
- Make Furukawa Rock Drill
- Model Rock Drill
- Engine QSB6.7
2020 Furukawa Rock Drill Rock Drill HCR1100-ER
2020 Furukawa Rock Drill Rock Drill HCR1100-ER
The HCR1100-ER drill incorporates innovative features for higher output and is capable of drilling at larger diameters.Utilizing a Cummins® Tier-IV EPA compliant engine, the HCR1100-ER combines higher performance with fuel efficiency.
The Furukawa HD822 drifter (patent applied for) is designed to minimize drill noise and vibration, while increasing performance. With 26.7% more impact and 13% more airflow than its predecessor, this drill has the ability to perform in harder rock at a larger diameter.
Features may include:
- The improved electro-hydraulics allow easier operation
- With FRD’s TFSS (total fuel savings system), the operator selects the optimum engine speed for the application, allowing all fuel savings functions to be automatically managed during drilling operation
- The monitoring system incorporates gauges next to the drilling station, allowing the operator a quick visual of engine temperature, hydraulic oil temperature and fluid levels
- Automatic rod changer to eliminate the need for operators to manually install drill steel, resulting in increased production and enhanced operator safety.
- Upgraded compressor increases free air delivery by nearly 28% to accommodate larger diameter drilling
- Winch-ready frame adds application versatility
Engine
Engine
QSB6.7
Engine Manufacturer
Cummins®
Cylinder Liners
6-Cylinder
Engine Power
Rated: 226 HP (168 Kw)
Rated Engine Speed
Rated: 2,200 rpm (2,200 min-1)
Cooling
Water Cooled
Emissions
Tier-IV Final
Motor
Motor Type
Drive: Hydraulic Motor with Reduction Gear
Fuel System
Fuel Type
Diesel Engine
Battery
Battery
12 Volt; 108Ah/5Hr
Electric
Electrical
DC 24V
Operational
Operating Conditions
Maximum Grade of Hill Climb: 57.7% (30°) | Drifter: 29.5 HP (22 kw)
Operating Speed
Travel: 0 to 2 mph (0 to 3.2 km/h) | Number of Blows - Drifter: 2,700 to 3,300 bpm | Number of Revolutions - Drifter: 190 rpm
Operating Temperature, Maximum
5° to 113° F (-15° to +45° C)
Hydraulics
Pump Type
Variable Displacement: Axial Piston Pump X2 | Fixed Displacement: Gear Pump X3
Airflow
Compressor Discharge: 275 cfm (7.8 m3/min) | Dust Collector: 918 cfm (26 m3/min)
Maximum Pressure
Ground Contact Pressure *3: 11.2 psi (77.3 kPa) | Compressor Discharge Pressure: 149 psi (1.03 Mpa)
Dimensions
Dimensions
Bit Diameter: 2.5" to 4" (64 mm to 102 mm)
Overall Length
Drifter: 44.5" (1,130 mm) | Guide Shell: 26' 0" (7,925 mm)
Overall Width
Drifter: 14.7"(373 mm)
Depth, Maximum
Overall: 12.9" (328 mm)
Length
Boom Slide: 3' 11" (1,200 mm) | Guide Shell Feed: 15' 8" (4,781 mm) | Guide Slide: 3' 11" (1,200 mm) | Rod Length T38 - T45: 10' (3.05mm) / 12' (3.66mm) | Rod: 10' or 12' (3,050 or 3,660 mm) | First Rod Length Maximum: 13' (4,000 mm)
Ground Clearance
23" (585 mm)
Angle Positions, Forward
Oscillating Angle: ±7.6°
Lift Mechanism
Boom Lifting Angle - Up/Down: 45°/15° | Guide Tilt Angle: 180°
Lean Angle, Right (deg.)
Boom Swing: 30° | Guide Swin: 30°
Lean Angle, Left (deg.)
Boom Swing: 30° | Guide Swing: 90°
Capacities
Fuel Capacity
84 US Gal (320 L)
Hydraulic Capacity
Tank: 45 US Gal (170 L)
Tank Type
DEF *4: 5 US Gal (19L)
Features
Maximum Traction Force: 19,700 lb-force (88 kN) | Guide Shell Maximum Pulling Force: 7,060 lb-force (31.4 kN)
Weights
Weight, In Running Order
With Fuel/Oil: 27,500 lbs. (12,460 kg.) | Drifter: 533 lbs. (242 kg.)
Features
Features
Boom Type: Extension Boom | Compressor Type: Screw 1-Stage | Dust Collector Elements Qty.: 5 | Dust Removal System: Automatic Pulse Air Jet | Dust Collector Suction Cap: Slide Type | Rod Changer - Number of Rods: 5 | Rod Size: T38 T45
Model Id
Drifter: HD 822 | Boom: JE326 | Guide Shell: GH831 | Compressor: AIRMAN PDS265-S37C | Dust Collector: A844
Feed System
Guide Shell: Motor Chain