2019 Beever™ Chippers 1418 Brush Chipper

Information

2019 Beever™ Chippers 1418 Brush Chipper

With its power and easily transportable design, this compact and economical chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The Eeger Beever 1418’s 18" (45.7 cm) diameter single top feed wheel with straight flow-through infeed design easily climbs over material, reduces drag and increases chipping efficiency, allowing it to overcome the limitations of comparable disc chippers.

Features may include:

CHIPPER DISC

37" diameter x 2" (93.98 cm x 5.08 cm) thick chipper disc material, ultrasonically tested and certified free of material defects, has four full-length, removeable paddles for maximum chip throwing velocity.

CHANNEL FRAME

8.2 lb., 6" (3.7 kg, 15.2 cm) Channel frame fully extends beneath the infeed for maximum support.

INFEED

Folding infeed tray with single (top) feed wheel and straight, flowthrough infeed design for more efficient material feed.

FEED WHEEL

TorqMaxTM Top Feed Wheel Compression system with spring assisted down pressure generates more than 3,200 lb/ft (4,338 Nm) of material pulling force.

Photos

Highlights

  • Muncy, Pennsylvania
  • 2019
  • Beever™ Chippers
  • 1418 Brush Chipper
  • CAT, Perkins or PSI
  • Available
  • 5'10" (1.78 m)
  • 8'2" (2.49 m)

Specifications

  • 2019
  • Beever™ Chippers
  • 1418
  • Brush Chipper
  • Brush
  • CAT, Perkins or PSI
  • 49–145 HP (36.5–108.1 kW)
  • 7,000 lb Torflex (3,175 kg Torflex)
  • (2) 215/75Rx17.5
  • (2) 215/75Rx17.5
  • 8.2 lb, 6" channel (3.7 kg, 15.2 cm channel)
  • 2.5" Pintle (6.4 cm Pintle)
  • Infeed opening: 33" x 60" (83.8 x 152.4 cm | Throat opening: 14" x 18" (35.6 x 45.7 cm) | Feed wheel: 11.5" x 9" (29.2 x 22.9 cm) | Disc: 2" x 37" (5.1 x 94 cm)
  • 8'2" (2.49 m)
  • 16'7" (5.05 m)
  • 17'3" (5.26 m)
  • 5'10" (1.78 m)
  • 5,350 lb (2,427 kg)
  • 24.5 gallons (92.7 L)
  • 9 gallons (34 L)